2017 rear camera jumper cable.

[TERRA]

2017 3500 CC 4x4 Big Horn. Rear tailgate has been removed for my slide in camper. I plan on removing the OEM backup camera and the jumper cable from the tailgate and install it on the slide in. The problem is that the jumper 68309561AA and the camera lead 68189124AC are only about 50 inches in length and I need about 84 inches. Since the jumper has male/male ends ordering another jumper will not help. I called Ram direct hoping they had a schematic and could advise me if a male/female jumper exists anywhere along the wiring from the Uconnect to the tailgate or even if a female/female plug exists. They didn't have a schematic to look at and all they did was call the dealership and then got back to me and stated that the 68309561aa was on back order - which had nothing to do with my question. Anyone have a schematic or point me to one or hopefully have the part number on a male/female jumper.

 

[TERRA]

Update - I found a female/female jumper about 19 inches long (no white label part number attached) just off the main harness where it split off (by the tow hitch) and becomes camera branch. So off the main harness cones the female//female 20 inch jumper, then male/male jumper 40 inches, then the camera lead 12 inches and finally the camera head. Since I have the other part numbers I just need the part number of the female/female jumper if anyone has access to a 2017 schematic.

 

[MJWenrich]

I believe the wiring I bought, to hook up to my camper, was the jumper that is located inside the tailgate and the camera. You might look at (in the dealer book) 68096415AC.