Here I am

$250.00 4 - 2000-2002 (*) Dodge Ram 2500 9 vent wheels, rings, caps & lug nuts

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

For Sale Dana 70 - Richmond Lock-Right Locker

Amsoil Synchromesh

Status
Not open for further replies.
Fits 2000 – 2002 Dodge 2500 Ram Pickup / Van, 16” X 7.5”, 8 X 6.5” lug pattern, 9 vent holes.

Complete Set:
4 – Wheels, RAM Logo Center Caps, Beauty Rings, High Pressure Steel Valve Stems & Caps and 32 Correct Lug Nuts. Recently refurbished, painted with correct "argent" wheel paint.



NOTES:
1). Will fit 1999 and down "BUT"-> You'll need to grind a little material off the steering knuckle where the tie rod end bolts up = on the same angle as the wheel - needs about ⅛" between wheel and knuckle. Did it to fit them on mine - no problems.
2). The Michelin tires - LTX-M/S2, LT 285/75 R16, Load Range E are past it they have around 25,000 miles, but are dry rotted.
3). Stockwheels.com lists same wheels. “Used” @ $105.00 each, “Refurbished” @ $125.00 each. Both are priced “without rings, caps, lugs or valve stems” + shipping???

IMG_2334.JPG
 
Sorry, forgot to mention I had the tires removed in hopes of making it easier for anyone interested to transport.
 
Guys, these are really sweet wheels and complete with everything = even high pressure S/S valve stems. Make me a "reasonable" offer to get these things out of my garage.
 
Joe, are these steel wheels or the original OEM allow wheels? How many miles are on them?

Can I send you a private message?

- John
John,

Feel free to send a PM. They are stock 9 slot steel wheels which I restored (removed all original paint and other debris), comes with 4 chrome beauty rings, 4 Ram logo center caps, 32 correct OEM lug nuts, S/S high pressure valve stems (rubber seal between stem base to inner wheel, rubber seal between washer to outer wheel and nut) and stem caps. They are not rusted, bent and/or otherwise damaged. I ran them on my truck until I was able to restore the aftermarket aluminum wheels (see picture left top) I had since 2002. They ran true, no vibrations or out of roundness. I have at least 20 hours in labor restoring them and painted with: Self-Etching Primer followed by Eastwood Argent (stock Mopar color) wheel paint. They're really nice and are ready to roll with tires of your choice. What year is your truck?
 
Status
Not open for further replies.
Back
Top