3200 gov spring

[Blue Ox1]

Hey guy's I got kinda a dumb question for ya ,does anyone know if you have a 3200 govenor spring that means your engine should rev to around 3200 ?I would assume that is correct and also what is the latest part# for the 3200 is it the one that is posted in the parts list on this site .

Thank's Joe

 

[bgilbert]

You should be able to rev 3200 or more without the spring. You will fuel or pull to 3200 with the spring, as apposed to fueling or pulling to 2500 or so and falling on your face at that point with the stock spring. Bosch #1-464-650-366

 

[Blue Ox1]

Because I was never able to get above 2600 rpm with the new spring installed,wonder if they just said they put it in and didn't. My receipt shows a couple of spring part # but none correspond with the 3200 spring which I requested. Something starting to seem funny with this,i'll have to check those # with bosch to check them thanks bill

Joe

 

[bgilbert]

What are the part numbers?



They may have the high idle screw set to 2600rpm and or you're not getting full throttle travel.

 

[Blue Ox1]

the spring they show are #1464651430 and 1467010410