3500 running boards

[Archive]

i have been looking for a set of alum. boards for my 3500 and just cant find the right ones. i really liked the ones dee/zee has but no go for a 3500. i've seen lots of diamond plate boards but didn't care too much for them. i also want them to be lighted. stainless steel would work also ( brite finish ) if anyone has any pics or links to what i'm looking for could you let me know thanks

------------------
94 2500 4x4 SLT,auto,176,000 miles,3:54,brilliant blue/silver,tst 250/635,pump turned up 20%,k&n,gauges,cat gutted,
2001 3500 4x4 q-cab slt,auto,2500 miles,3:55lsd,brite silver,stock (for now)both have 12k hitches&15k's in the beds,30ft fourwinds 5er

 

[Archive]

Iceman, Check out J&J Enterprises at www.j-jent.com . I have their stainless steel Nerf-N-Step bars on my truck. I think you'll like what they have. All their products are stainless steel. They are not cheap, but you get what you pay for. Use a little polish, and they're nice and shiny again. -Glen

------------------
1998 12 valve 2500 Quad Cab, A/T, 4. 10, Deep Amethyst, 4. 5" Skyjacker Double Flex lift kit, 36. 0"x14. 5"x16. 5" TSL Super Swamper radials on 16. 5"x9. 75" Weld Typhoons, Speedliner spray in liner, Raven high rise cap, J&J stainless steel Nerf-N-Steps, 4" Jardine exhaust, 370 HP Diamond B Injectors,JRE #3 plate, DTT VB & converter

 

[Archive]

I also have J&J. . lighted running boards and
their mudflaps(lighted also). Look great. . kinda pricey,but not really that much more than some others we looked at that were not near as nice. These boards are used on the Centurion trucks(Ford and Dodge).

Here is another one I would look at
"Ultra Board" from DTA Corp. http://www.dtacorp.com.

I couldn't find any of these to look at so went with J&J.

FWIW

 

[Archive]

Ditto on J&J I've got a set on my rig and they still look great , and the best part is unlike some of the others you can actually step on these without that,"will it hold me feeling" Just my 2 cents

 

[Archive]

I have a set of mopar running boards they work great i just put them on about 2 mounths ago. they fit perfect and look great they are diamond plate aluiminum they have a splash gaurd behind the front wheel so that nothing splashes up on the paint on the door and it does work. sorry i cant send any pictures but i dont have the technology and i dont have any pictures of the truck either.



------------------
97 3500 4x4 ext. cab sun poppie YELLOW, Alcoa five star rims, hadly air horns, mopar diamond plate running boards w/ tons of running lights, weather gaurd diamond plate tool box, HX40 turbo w/ 18. 5 mm housing, big valves, ATS exhaust manifold, big head gastket, 4 inch pipe from turbo to 5 inch tip, big injecters, tons of pump work, bigger intercooler, tons of transmission work, turbo blanket, no smoke valet switch, Mag hytech rear and transmission pan, and some other goodies all done by AUTO WURKS DIESEL, still not as quick as my 97 viper gts

 

[Archive]

I have the DeeZee running boards on my 3500 and have been happy with them. They go well with the NW Custom mud flaps, too.

You can see pictures of 'em at http://www.dodge-diesel.com/static/eth.html Just scroll down to the bottom of the page for the pictures of the truck with them installed.

------------------
'01 ETH/DEE 4x4 QC SLT 3500 4. 10

[This message has been edited by Mike Sisk (edited 11-26-2000). ]

 

[Archive]

I had the dealer install Luvene (www.Luverne.com I think) on my 3500. Had looked at Dee Zee and a couple others but these were installed cheaper than I could get the boards only. The dealer is in OK though.
Larry