Here I am

37" Tire Burnout

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2007!!

Tc Lockup???

Status
Not open for further replies.
That is awesome!!! But it makes me cringe knowing how much 37"s cost. Mine cost me more than my whole lift. Still... awesome!
 
TCluff said:
A friend of mine videoed this burnout just before I got my new tires put on.

http://video.thedieselgarage.com/Player.aspx?fileid=37DA3806-8BD3-4E8C-83D3-772342AF8770



:-laf



Saw you last night. Actually, should I say heard you. Coming out of the darkness by the lights on the overpass near Smith's I hear this loud, whirring jet engine sound coming towards me, tire sqealing... and then a cloud of smoke engulfing some little rice-rocket :-laf



The I looked over to my GF and said that's why I need to get twins. She just :rolleyes:
 
Last edited by a moderator:
JStieger said:
:-laf



Saw you last night. Actually, should I say heard you. Coming out of the darkness by the lights on the overpass near Smith's I hear this loud, whirring jet engine sound coming towards me, tire sqealing... and then a cloud of smoke engulfing some little rice-rocket :-laf



The I looked over to my GF and said that's why I need to get twins. She just :rolleyes:

that is great, most of the time i cant get the little cars to race, i need a better clutch, the video was a lot longer but we cut it down to shorten it up... , i shifted into 4th gear and the clutch started slipping so i quit burning the tires and tried to take off but the clutch was too hot to grab... we will make some more videos this weekend and try to get them posted Oo.
 
TCluff said:
that is great, most of the time i cant get the little cars to race, i need a better clutch, the video was a lot longer but we cut it down to shorten it up... , i shifted into 4th gear and the clutch started slipping so i quit burning the tires and tried to take off but the clutch was too hot to grab... we will make some more videos this weekend and try to get them posted Oo.



You should get the DD clutch like Bear got. Last time I talked to him he said he loved it - 3rd gear launches no problemo, but had to get a new slave after a week or so of installation.



Looking forward to the vids! How do you download the streaming videos from that website?



BTW how are you liking the 3-flows so far? I basically just run around with them and the TST on timing only with just a hair of MP8 pressure. I also recently picked up a used CP3 off EBay for $350 - just might have to send it off as a core to get modified :D .
 
JStieger said:
You should get the DD clutch like Bear got. Last time I talked to him he said he loved it - 3rd gear launches no problemo, but had to get a new slave after a week or so of installation.



Looking forward to the vids! How do you download the streaming videos from that website?



BTW how are you liking the 3-flows so far? I basically just run around with them and the TST on timing only with just a hair of MP8 pressure. I also recently picked up a used CP3 off EBay for $350 - just might have to send it off as a core to get modified :D .
i ususally run tst only on 1x1, im not sure yet as to which clutch i want, As for the camera we have a cable that we can capture video off our camera and save to the computer then we edit it as a windows movie video and up load to the diesel garage. Then you will get a e-mail from the diesel garage that says your video is ready with

a link address copy it and paste it onto your TDR thread. :)
 
Status
Not open for further replies.
Back
Top