Here I am

370`s diamond B`son stock 215hp?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Tire Runout

Brake Loss

Status
Not open for further replies.
would the diamond b`s (370)work all right on a stock ~96 manual ? #ad


[This message has been edited by goatherder (edited 01-19-2001). ]
 
They work super in my 97 215 hp engine with one exception adding the 370 HP injectors and a 16CM2 housing is more than the clutch will take.

------------------
EAT'M UP
97 2500 Club 4X4 3. 54, Forrest Green/Driftwood, LSD 5 speed, & Psychotty Air System, TST #11, 370 HP injectors, timing at 16 deg. , 16CM2 housing, AFC spring kit, Geno's Exhaust Blanket, TST EGT gauge & 0-60 boost gauge in A Pillar, Cat-be-gone, 4" Dynomax Bullet muffler, Crome 4" turn down, Rad fan removed, AmsOil Through out, Geno's trans filter kit, AmsOil Bypass system, Lund Winter front, Leer Cab Level Shell Driftwood , 255/85R16, Dyno'd 342 HP pre injectors & turbo housing *NRA/USPSA member and proud of it*
 
So good you won't believe #ad


------------------
95' 2500 5spd, 2wd reg cab 131,000
TST #4 plate kit, 370 Diamond B injectors, Afc spring kit, Gov. spring kit,TST's fuel pressure adapter and 2 guage pillar mount, SPA EGT/Boost guage. Joe D's Sachs clutch is in.
K&N Re-0880 & Prefilter. Cup Smoothie, Finger touch drain plug, Monster exhaust tip, Royal Purple Oil.
 
goatherder:

You can put those 370's in your truck
with no problem. I have a 96' automatic
and everything worked fine.

You will REALLY notice a BIG difference
in the power just like the other members
already told you.

Good Luck!

----------
John_P

------------------
Red '96 4x4 2500 Auto 3. 54, TST #5, Major Pump Mods(By "Scheid Diesel") 370 Diamond B Injectors, Gov. Spring kit, AFC Spring kit, Banks Exhaust, Prime Loc, Cummins Chrome Kit, Pro-Torque Converter, BD Valve Body, BD Pressure Loc, Isspro Gauges, Sendel 16" Alum Wheels w/ 33" BFGs
 
I love em. I still have stock plate and my stock clutch works great so far.

------------------
1972 Chinook class C with 96/215 5spd, 4/5" exh, 4"BD, MagHytec, 85gal fuel, K&N RE0880, AutoMeter, 370's, BD gov kit, BD afc kit, 16cm, 16%btdc, yada-yada-yada
www.fostertruck.com/cummins
 
Status
Not open for further replies.
Back
Top