4" EXAUST FOR 1992

[DWATTS]

Who Still Sell's Exaust For These Trucks

 

[MMoyle]

Hi DWatts,



Check out Rip Rook's exhaust system. Alot of people on this site uses it. Here is the link:



http://www.protintnw.com/sa_dodge-exh.htm



Thanks

Mike

 

[DWATTS]

There Has To Be Someone A Little Cheaper This Is Just A Project Truck

 

[ARedetzke]

I made mine for under $200 out of a piece of flex pipe, some straight pipe, and a few angles from a Truck Center nearby.

AJ

 

[JLEONARD]

Bubble gum,hair spray, and rubber bands ... really cheap. Ask Tugboat Phil... . he knows where to get some cardboard mailing tubes for free that will work.

I bought mine from Janetty... he didn't advertise one but when I asked he pieced a system together.

I think it is similar to Rips.

Jay

 

[Forrest Nearing]

stack it!!! w/ a box crossover, you can do a set of stacks for less than $250 easy!



Forrest

 

[tugboatphil]

... really cheap. Ask Tugboat Phil... . he knows where to get some cardboard mailing tubes for free that will work.

HEY!! I resemble that remark! I'm not saying that I'm cheap, but I won't even pay attention!! :-laf



Actually those cardboard tubes cost $. 03.

 

[dodgenstein]

Try big exhaust .com. I got the pipe that goes around the transfer case for my stack project and the fit is excellent. The website lists several brands, just go to Big Exhaust brand.

 

[wtrenholm]

I had a 4" muffler & tailpipe for a 2nd gen, bought a stick of 4" pipe and a 3" to 4" adapter. Stepped up to 4" just after the down pipe goes horizontal. A few wire feed boogers and a coulple clamps and I was all set.



Wayne

 

[BHiggins]

I've gotten two 4" systems from Big Exhaust.com, one for my 1990, and one for my 1992. I believe the whole system (from the turbo back) was less than $400. 00 without a muffler, but it included the muffler replacement pipe. It's a great system, well worth the $$.