4 inch downpipe

[RSchwarzli]

Does anyone know where to get a 4 inch down pipe? Does it matter if I am using a HX35 turbo? Will a second gen 4" pipe work? Thanks,



Robert

 

[Greenleaf]

2nd Gen, no. You build your own or buy one from PRD. b With the HX turbo you need to weld on an adapter from 2. 75" to the 4" at the flange.

 

[RSchwarzli]

Thanks. That is what I needed to know.

 

[JRussell3176]

Stan's sells a bolt-up 4" downpipe. Not sure if it will fit with a WG housing, but it sure looks like it will.

 

[RSchwarzli]

I did check with Stan, and he said to do a custom like that (WG housing and 1st gen pipe) he would need my truck to be shipped out to him. He cannot do a 2nd gen turbo mount on a 1st gen pipe without having the truck there infront of him.



Robert

 

[dpuckett]

The mount from 1st Gen to 2nd Gen is the same, just moved back farther for the WG housing.



Daniel

 

[83 crew cab]

on the 83 crew cab we have we use a 2nd gen 4 inch down pipe with the last bend cut and rewelded you can sorta see the pipe on this page http://www.geocities.com/blown72rr/cummins.html

 

[EKender]

Hello, I had to custom fit a 4" on my 90' . Made a big difference. Ernie

 

[cguthrie]

Rip has em

 

[RSchwarzli]

Who is Rip? I do not know him/them?

 

[PToombs]

Rip Rook, I assume he means. Do a search, he's a common name.

 

[skobylenski]

Here's the link to Rip's site, and more specifically, to the Dodge page. The 1st Gen. full exhaust is about 1/2 way down the page, with a link to the 4" dp option. I've considered a RR exhaust (I've only heard good things about his work), however I think I'll end up building my own since I'm eventually going to stacks.



http://www.iinet.com/~sautomotive/sa_dodge-exh.htm

 

[JRussell3176]

Wow, Rip's kit is $600 with the downpipe and you have to cut and weld it yourself!



Stan's kit is $475 with the 4" downpipe and there's no fabrication required. It also bolts-up using the stock hangars and comes with all the hardware necessary.