4 inch exhaust?

[TXDSLSHOP]

Is Jardine making the four inch system for a first gen. 2wd. yet? How about anyone else? Nascar Mark says he has four inch. Where'd you get it Mark? I really like the Jardine systems for price and quality. I've installed 6 systems for myself and others. They were all second gen's. I really don't want to take out a second mortgage to put 4 inch on! Thanks!

 

[formula]

Me thinks that this subject was discussed a bit recently. Check this thread: https://www.turbodieselregister.com/forums/showthread.php?threadid=58069&highlight=rip



And while I'm here... ... . how's about a nice set of shiny 4" STACKS!!!!!



Sean

 

[TXDSLSHOP]

I remember reading that post. But, for the money I would prefer to wait for Jardine to see how much theirs is. I was able to put my mufflerless system on my second gen's for around $250. 00 by getting the down pipe and tail pipe pieces and using my 4 inch pipe here and building my own hangers. I am definitely concerned with price! I was hoping someone here knew if Jardine was selling them yet. Perhaps another company will piece them out? I definitely want a four inch downpipe if someone will take the time to make one work! I love the sound of four inch exhaust! How do your stacks sound? I haven't heard a set that sounded as good as my four inch single. Of course their isn't many stacked trucks in my area! Maybe I should change that?

 

[formula]

Ah, I see what you're getting at. I'd like one of those downpipes too, if anyone decides to make em. Or maybe I'll just have to fab up one myself. I love the sound of my stacks. They make a wicked sound at WOT. Beats the crap out of the out-the-back tailpipe sound as far as I'm concerned.



Sean

 

[nascar mark]

As far as I know nobody makes a 4" from turbo back for our first gens. I installed Piers hx40wg16 which has a 4" outlet so I used PDR's 4" down pipe, which I modified by cutting and rewelding. I also had to use a 2nd gen transmission dipstick to clear as it is tight in there. I cut and welded 4" pipe and elbows to make this system.



Lots of 3" and 3. 5" down pipe and around tranfer case systems out there, but for me it doesn't make sence to go from 4" to 3. 5" and back to 4" again so I fabed everything but the modified down pipe from PDR.

 

[Old Smoky]

I got my 4" exhaust from Rip Rook

[URL]http://www.protintnw.com/sa-main.htm[/URL]. It uses the stock down pipe, and is 4" back from there. 5" stainless tips are available too.



Mike