We still need to get some 45 degree fittings to lower the fuel line between carbs to get them under the air cleaner. We used the rubber line just to get it started.
There's a little valvetrain noise, but it keeps getting quieter. Oil pressure is 80 at idle.
Here's a link to the video of us starting it up for the first time since it was on the dyno up in The Great White North.
www.padefamily.com/Roadrunner/RoadRunner528Hemi.wmv
#ad
There's a little valvetrain noise, but it keeps getting quieter. Oil pressure is 80 at idle.
Here's a link to the video of us starting it up for the first time since it was on the dyno up in The Great White North.
www.padefamily.com/Roadrunner/RoadRunner528Hemi.wmv

Last edited by a moderator: