Archived 98 dodge 12V will not start

[JDrummond]

Drove the truck to work everything was fine tried to drive home four days later Truck will not start, starter fuse is good and relay clicks. All lights and gages on cluster dead. Windowns non operational, blower motor will not turn on. door lock work fine and the batteries are at full charge

 

[AKAMAC]

There are two fusable links that feed the PCM and PDM direct from the batteries. Check if you have voltage to both points. Just follow the small wires to where they end from the batteries.

If that fails look for a common fuse or relay that could cause PDM to fail but supply power to the AUX circut.

 

[RRamsey]

Yeah, what he said, my thoughts exactly.

 

[Missouri Mule]

I take it your starter is not cranking the engine over. If so I will have to think on it.

Is your fuel shut off solenoid plunger(rod) pulling up?

 

[Joe G.]

Check fuse #9.

 

[JDrummond]

Got the truck running today it was one of those fusable links that feed the pcm thanks for the help