Engine/Transmission (1998.5 - 2002) A couple of fuel system ??'s ( LP & filter )

[JPLB22]

I have 2 questions.



First is... . Is the banjo bolt and fitting that is at the inlet to LP interchangeable with the one at the inlet to the fuel filter ?? on an '02 truck



Second... I only have the LP that is on the truck ( no spare ). I am going to relocate my pump to the frame in front of the tank. So I need a shop to make me a bracket to mount the LP to. But without a spare LP off of the truck...



How do I get them to make accurate holes in the bracket for the LP ??



TIA

Jeff

 

[Whitmore]

Jeff, I used my oem bracked and moved it to the frame, did have to drill 3 new holes in the top of it to mount the l/p to but it was a cake walk.



You will also need to go to Cummins and get a pigtail for the wiring, it is like 8 inches long just cut it in the middle and extend the wiring from its oem location.



Cheers, Kevin

 

[JPLB22]

Thank You Kevin !



I am going to go with Ncostello's instructions on " Saving Private Carter ". In those instructions I believe he says to use the inlet banjo on the LP to reconnect your new line to the fuel filter. He shows pictures of a '99 filter I believe. So I'm wondering if that is possible with an '02 filter.



Jeff