2nd Gen Non-Engine/Transmission A Pillar Triple Guage Install

[aviatorman]

02 HO 6spd, got a triple A-Pillar from Geno's with Pyro, boost, fuel pressure. The hook ups seem straight forward. Problems I'm seeing is where to come through the firewall and which wires to tap for 12V switch and instrument lights. Any pics or advice would be greatly appreciated.

 

[Jrork]

You have a PM

 

[HWestfall]

I have the triple gauge A-pillar set on my 02 with the same gauges. All the wires and tube are run through a plug in the fire wall just below were thw clutch goes through, The light wires are connected to the dash light dimmer wires behind the instment cluster. the 12v are connected at the power box on the left inner fender

 

[HWestfall]

I have the triple gauge A-pillar set on my 02 with the same gauges. All the wires and tube are run through a plug in the fire wall just below were through clutch goes through, The light wires are connected to the dash light dimmer wires behind the instment cluster. the 12v are connected at the power box on the left inner fender.

















02 Pat. Blue 3500 6sp Pac Brake,Leather. Isspro gauges, Dee Zee Running Boards, Stainless Trim, Chrome Brush Guard,AFE Stage 1 Air Filter