Abbott ERA Install

[Archive]

Any of you folks installed an Abbott ERA using Rickson's installation instructions? If so, do you still have the instructions? Possible to beg/borrow/d/l the instructions? I've got an Abbott for my '99 4x4 with rwal and the Abbott directions aren't all that clear. I'm given to understand that Rickson has installed lots of these ERA's and the directions are very concise.
Any help appreciated.

------------------
'99 Ram 2500 QC 4x4 Shortbed SLT A/T ISB5. 9 Cummins
K&N, Westech pyro/boost Line-X bed liner(more equip in the works)

 

[Archive]

Ed-

Give us more information... where are you having a problem? I don't have the instructions with me at the office but can probably still help. My installation was not difficult other than finding the correct wire up near the master cylinder.

243

------------------
1999 Quad Cab 2500 ST 4X4 SB 24V/5speed 3. 54/LSD Driftwood/Agate
[*] 275hp Injectors, Wastegate Elbow, Boost Module by TXRam, Straight Pipe
[*] VDO Boost and Pyrometer on Autometer Gauge Pod
[*] 235/85/16 Dunlop Mud Rovers, RS9000's, Hella 500 Driving Lights Husky Liners
[*] Smittybilt Sure-Steps, Magellan 315 GPS mounted on shifter console

-- email address removed --

 

[Archive]

ERA = Earned Run Average, Equal Rights Amendment, ?... ... OK I give up, what are you installing?

 

[Archive]

Got this information from Ted Jannetty's website and I believe this is the product in question.
#ad


Abbott Electronic speedometer recalibration module

For those of you who want to change your tire size without affecting your transmission shift points and ABS; This will make the job quick and painless, easy 3 wire hook up, can be set for any tire size or gear ratio by flipping the appropriate dip switches using the supplied chart.

Give Ted a call maybe he can solve your problems, he is always willing to help out from what I have seen.


------------------

• Eric D. Howard --- Baby BOMB'er! --- Member since April 8th, 2000
• 2001 Dodge Ram 2500 HD 4x4 SLT Auto Reg cab Cummins Turbo Diesel 4. 10 gear ratio LT265/75R/16 tires
• Patriot Blue Pearl Coat, Agate interior, Leather seats EVERY option - Coming next week Line-X Bedliner
• In the VERY near future VA CPC, JRE 4" Exhaust, and Autometer Ultra-Lite Boost and Pyro Gauges

 

[Archive]

Folks. .

ERA: Electronic Ratio Adapter

243: Trying to locate the pulse sensor wires to the anti-lock sensors. I have 2 wheel anti-lock.
Rear of the trans tailshaft/housing? My factory wiring diagram looks like spaghetti to me

I understand that Rickson has excellent instructions. Abbott's are ok, but not all that clear.

I didn't think to contact Jannetty. Rickson wants to sell me an ERA;I already have one.

I'm looking for a copy to study before I start cutting wires.

Thanks for the assistance.

------------------
'99 Ram 2500 QC 4x4 Shortbed SLT A/T ISB5. 9 Cummins
K&N, Westech pyro/boost Line-X bed liner(more equip in the works)

 

[Archive]

ED-

You can splice into the pulse sensor wire under the hood next to the power distribution box. I'm at the house now and have unwrapped the wiring to jog my memory and found the directions. Send me an email and I'll give you some phone numbers to contact me.

243

------------------
1999 Quad Cab 2500 ST 4X4 SB 24V/5speed 3. 54/LSD Driftwood/Agate
[*] 275hp Injectors, Wastegate Elbow, Boost Module by TXRam, Straight Pipe
[*] VDO Boost and Pyrometer on Autometer Gauge Pod
[*] 235/85/16 Dunlop Mud Rovers, RS9000's, Hella 500 Driving Lights Husky Liners
[*] Smittybilt Sure-Steps, Magellan 315 GPS mounted on shifter console

-- email address removed --

 

[Archive]

My thanks to 243 and Craig for their assist!! I got the thing installed and works like a champ!

Just another great reason to suscribe to the TDR AND this board!

Thanks to all for their input.

------------------
'99 Ram 2500 QC 4x4 Shortbed SLT A/T ISB5. 9 Cummins
K&N, Westech pyro/boost Line-X bed liner Rancho 9000 shocks Midland CB(more equip in the works)