2nd Gen Non-Engine/Transmission AC Vac.

[Twisted Shifter]

Houston I have a problem … I have the truck in shambles and I am ready to SCREAM …



On the ’94 I need to know where the vacuum line that goes into the firewall some place by the turbo goes. Mine was accidentally pulled thru the firewall and I can’t find the hole to put it back. The second part of that dilemma once I find the passage thru the firewall what does it connect to? I have the dash all but out of the truck and can’t find what it should attach to. Any help would be great.



Thanks in advance



Twisted

 

[Bob4x4]

On the cabin side it is the vacuum feed to the hvac control. It runs along the top of the evap housing the down to the controller at the driver side of the housing



Bob

 

[Twisted Shifter]

Thanks Bob, It didnt look like I had enough to get that far. Does it plug into the block that has the yellow, green, red tubes etc in it?

 

[Bob4x4]

yup that is where it needs to end up



Bob

 

[Twisted Shifter]

Cool deal ... thats what I thought but it didnt look long enough ..... Oo.



Thanks again Bob!!!!