Attention: TDR Forum Junkies 
Okay Got the Microphones working. Not too hard. The question is how to get the Uconnect bluetooth connection light and main uconnect button working on a aftermarket system. Theres only 4 wires for the buttons going up to the after market and only 2 wires left off the factory mirror (voice req and sensor ground) Any ideas?
BTW Blue with paint to pin one to connector 1 on stock auto dim mirror to power in for Uconnect mirror . MIC in (+) (both) to insolated "WHITE" and MIC in (-) on sheild. Works Great! Still working on the switches.
BTW Blue with paint to pin one to connector 1 on stock auto dim mirror to power in for Uconnect mirror . MIC in (+) (both) to insolated "WHITE" and MIC in (-) on sheild. Works Great! Still working on the switches.
