AirDog and Fuel Pressure Gauge Adaptor

[ctd4stan]

If you have an AD FP100 or FP150 installed, do you also have a fuel pressure gauge or warning light installed too?



If so, where did you "attach" the FP gauge/sensor adaptor to?



a) Air Dog itself (i. e. the AD warning light kit)?



b) If you routed the AD back through the stock fuel filter housing, did you put the FP adaptor on the fuel filter lid?



c) Or for some of us "basically stock" CTD owners, with an AD (or similar), you do NOT have a FP gauge installed?

 

[BillGotthelf]

I bypassed the factory filter and put the sending unit in the port on the Air Dog housing. This is after filter so I can see when filter performance is starting to drop.