AN sizes

[Don Tanklage]

if you are plumbing your motor and want to know the sizes here they are -



-03 = 3/16"



-04 = 1/4"



-06 = 3/8"



-08 = 1/2"



-10 = 5/8"



-12 = 3/4"



-16 = 1"



go big the first time...



then you wont have to redo it later



don

 

[bgilbert]

Yes, but unfortunately the inlet of the VE is only 1/4":-laf. I get lots of chuckles from my -12, 3/4" hose outta the bottom of my fuel tank. Course it's nothing compared to the tractor pullers I've seen.

 

[Don Tanklage]

the inlet's under pressure



the feed to the lift pump is under vacuum



you cant make it too big

 

[sdstriper]

-AN's simplified, they're all in increments of 1/16"...

 

[Leper]

-AN's simplified, they're all in increments of 1/16"...

I was reading the first post and I thought eureka, I figured it out. I scroll down and see you beat me to it. Good info.



AN 6 = 6/16 or 3/8