2nd Gen Non-Engine/Transmission Anyone having problems using the Brite Box

[JDKammin]

I bought a Brite Box from Geno's Garage and installed on my 94. I like how much better the lighting is, but keep blowing the left side low beam. That is the side I hooked up the Brite Box connectors to, but should not have anything to do with it. When I take a bulb out, it has a milky or smokey look on the inside of the bulb. Any help would be appreciated. Thanks.

 

[MStearns]

I've never noticed any trouble with the brite box I installed on my 96.



As an aside, my left side low beam as always burnt out faster than the right. Even before I installed the bright box. For what ever reason I only get half of the bulb life out of the drivers side. My Bright box is installed on the passenger side. I'm not sure why the driver's side low beam always seems to go out first.

 

[robbiesworld]

I bought a brite box a few years back and was very unsatisfied with it, The quality of the the plugs was terrible and it burned up a headlight switch. I sent it back and got a refund.

 

[WilsonF]

If you want to use the brite box just to get both filiments to light on high beam, try this, its worked on mine for two years now. And a lot cheaper.

Both filaments lit when on high beam FYI - Dodge Diesel - Diesel Truck Resource Forums

Floyd

 

[MountainMan1]

I've never noticed any trouble with the brite box I installed on my 96.



As an aside, my left side low beam as always burnt out faster than the right. Even before I installed the bright box. For what ever reason I only get half of the bulb life out of the drivers side. My Bright box is installed on the passenger side. I'm not sure why the driver's side low beam always seems to go out first.

A bit off topic!



I don't have a Brite Box. My left low beam filament always gets a half life then the right one!?! I am very very careful about touching the glass, I use food service gloves!



Peter