Competition Anyone running a Triple Dog w/ Q-zilla boost fooler?

[JBee]

Wanted to see if anyone else is running a Quadzilla boost fooler with their Triple Dog/Bullydog system. My boost would read peak of 32psi and run typically under load w/trailer at around 26psi. Now with the boost fooler my reading peaks at 23psi and won't go over that pressure. It feels like it has better grunt, but the reading doesn't seem to be accurate. Any ideas or similar issues? Thanks.

 

[jeeping_0]

the boost fooler tells the computer it is 22 to23 psi when actually it

is about 45 psi max i am running the same thing you need a separate

boost gauge to get the actual boost reading

 

[R_Painter]

I agree if you are reading the boost pressure from the map sensor it is not the true reading. Get a manual boost gauge

 

[qzilla]

Or get a digital gauge that does not rely on OBD2 data for its readings.

 

[JBee]

How do the manual boost gauges pick-up the readings? I assume you run a manual pressure sensor to give the reading to gauge? Thanks.