Engine/Transmission (1994 - 1998) Anyone running propane?

[JLewis]

I have a power shot 2000 propane injection kit that was on my old truck. I've been debating whether or not to hook it up to my new truck. I kind of wanted to run without it and just make power on diesel fuel but I have the kit sitting in my garage and it sure isn't doing anything in there. I need to know if it is alright to run the propane fed line into the intake before the intercooler or should I try and inject it after the intercooler. I remember hearing that an intercooler full of propane during shifts and what not might be a bad thing. I'd like to at least try it out on the truck temporarily and if I don't want to keep it I'll just take it off and sell it. So where should I pipe it in where I can easily take it back off if I need to. Thanks

 

[nickleinonen]

most of the kits i have seen inject the propane pre turbo... is post turbo propane injection a good thing? my thinking. . at pre turbo, the pressure is much lower. . and when boost drops at shifting, if your kit has a pressure sensor, it will cut out the propane for a bit, and then when the boost builds, propane back in. . if it is post turbo, the same setup will work, but the propane regulator needs to be setup to over power the boost so like 30-40psi higher. . 40 psi on the propane will make a lot flow...