ARB air locker is now available for front. Early 07 for rear

[guava]

The new application guide is out for ARB's air lockers and they have added the 3gen front axle. Early 07 for the rear. I've been waiting for them to come out with these so maybe there is interest in a group purchase?

 

[TAbbott]

Are these for the Dana units or the newer AAM's? If they're for the AAM's I may be interested --- install at the same time I get the ratio's changed from 3. 73's to 3. 42's, which are also supposed to be available in 2007 I think... .

 

[ENafziger]

Maybe interested in group buy, if for the AAM. Just bought some for my old '82 dodge, and they were pricey... $1500 for the pair. Need to get those installed first and see how they work...

 

[Hercules130]

HHHmmm, i wonder if my pacbrake compressor will run those?

 

[p-Bar]

Is the 07 the 10. 5" AAM???

 

[Prairie Dog]

I think he's just talking about the front 9. 5" AAM diff.

So how much $$ are we talking?



Scotty

 

[Lips]

HHHmmm, i wonder if my pacbrake compressor will run those?

ARB's are set to run about 80-95psi and dont need a lot of volume obviously. I've seen guys run them off lots of different types of compressors and/or CO2 tanks.

 

[CStockton]

http://www.arbusa.com/alac/215110.pdf

 

[jwilliams3]

Good find...

Who's got the best price?

 

[CBrahs]

Is the 07 the 10. 5" AAM???

My 07 is the 11. 5

 

[steved]

Umm, they have had the ARB out for several years for the 9. 25AAM front axle... this is not new news.



It is the SAME unit used in the 9. 25AAM GM IFS center chunk...



They have been pushing off the intro of the 11. 5AAM ARB (and Detroit) for a while...



steved

 

[Bob4x4]

My 07 is the 11. 5

All ho's have the 11. 5



Bob

 

[Prairie Dog]

All ho's have the 11. 5



Bob

On the front?

 

[Hercules130]

Umm, they have had the ARB out for several years for the 9. 25AAM front axle... this is not new news.



It is the SAME unit used in the 9. 25AAM GM IFS center chunk...



They have been pushing off the intro of the 11. 5AAM ARB (and Detroit) for a while...



steved

I thought it required an extensive amount of grinding to the center section to get it to work?

 

[steved]

I thought it required an extensive amount of grinding to the center section to get it to work?

No, I know of at least a couple guys who have dropped these right in without issues... no grinding needed...



steved

 

[steved]

On the front?

Last I knew, 9. 25AAM is the only front I know about...



steved

 

[osiris]

so i am confused... can we get these for both the fronts and the rears?

 

[steved]

so i am confused... can we get these for both the fronts and the rears?

Only for the front as of the last I knew... they keep pushing off the release of the rear...



steved