Auto Meter model #'s

[David Muench]

Haven't installed mine yet, but they sure look nice. They are a matched set. 3365 for the pyrometer, 5249 for the probe, and I forget the number for the boost gauge. It's the 0-35 psi mechanical gauge. Matches the pyro.

------------------
'97 Jeep TJ - Tons of stuff.
2001. 5 BR3500 Chassis Cab 4x4 163"wb - ETH/DEE, SLT, K&N in stock airbox, autometer boost/pyro, GTS clear headlight covers, no bed (yet). .

 

[KatDiesel]

<font color=blue>I have the AutoMeter UltraLite series.

• EGT 0° to 1600° - #4365
• EGT Thermocouple - #5244
• transmission temp 100° to 240° - #4357
• Boost Gauge 0 to 35 PSI - #4304
• Custom Boost 0 to 50 PSI - #4304SP

<font size=-2>

[This message has been edited by KatDiesel (Eric Howard) (edited 02-16-2001). ]

 

[Joseph Donnelly]

I have a set of the 2-5/8" diameter Autometers and like them. I don't remember model numbers off hand.

I stopped by Diesel Dynamics today and was pleasantly surprised to see that they are carrying Autometer gauges now--the brand I like best. The gauges look nice, have the DD logo, and have in some cases different calibration ranges. For example, the boost gauge goes up to more "earnest" levels than most Autometers #ad
With their 20% discount good to the end of this month, you might look into them.

 

[Guest00]

If you want black bezels, best for pillar mounts as they won't reflect lites around the chrome bezel at night, you just prefex the gauge part number with a " B " for black, no extra charge.

 

[DRT]

For those of you running Auto Meter gauges, what model numbers did you decide on for boost, temp and EGT? Does the EGT match the others in appearance? Having trouble finding a "matched" set. Are you happy with them? TIA--dave

------------------
Traded a fully loaded 96 V10 for a 01. 5 4X,QC,LB,auto,3. 54,everything but leather,Patriot Blue
2000 Alpenlite Rainer DX slide in
1998 Neptune 230 walkaround sport fisher

 

[Chasman]

I went with the Auto Meter Sport-Comp series, these gauges have a black background that closely matches the dash in the truck. Both gauges are full sweep and match. I don't have a transmission temp gauge as I have the 6-speed.

EGT 0° to 1600° - #3365
EGT Thermocouple - #5244
Boost Gauge 0 to 35 PSI - #3304

Sport-Comp gauges come standard with brushed aluminum bezels, however like Jnutter said if you want black bezels put a B after the part number for the gauge. I suspect that specifying black may put you into special order land but they are worth it. I didn't know that they could be had with black until after I had bought my gauges so I sent them in to Auto Meter and for a small charge they changed out the bezels (this is not a DIY job). I'm very happy with this setup.

Charlie


------------------
Y2K+1 2500 RC 4x4 ETH-DEE SLT, 241HD, 3. 55ASD, TT, CS

 

[BIG BOB]

I just got back from the Northwest BOMBers session at Rob Hansons in Enumclaw, Washington. Where I finally installed my Autometer Ultra-lites. (Yes John, you were there! Remember?) I installed the following gauges in an Autometer 3 gauge piller with tweeter;

From Summit Racing
EGT Gauge #4365 $101. 00
Pryo Comp Probe #5244 $97. 00
Fuel pressure #4361 $187. 00

and from Janetty Racing
50# Boost gauge #4304SP $65. 00
3 gauge A-Piller #17205 $70. 00

I put the blue replacement bulbs in the gauges and they really look awesome at night!

PS. We had about 30 Dodge Cummins at Rob's Saturday. It was really great!


------------------
<font color=blue>"WHITE OBSESSION" 99 Quad Cab, White, SLT, 4x4, 5-sp, 3:54's, Raven cap (cab high), Rhino liner, Stainless Nerf Bars, Stainless Rocker Panels, Tow package, Valentine One, Uniden PC78LTW CB, Hadley Bully Air Horns, HOT Power Edge, Bully Dog Stage III injectors, Psychotty Air Induction, Braided SS Fuel Lines, 4" Jardine Exhaust (Love the deep throaty sound), 285/75R16 Cooper A/T's. </font>

<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1086000&a=9265455" TARGET=_blank><font color=red>New Pictures of my "White Obsession" and Dyno Run</A></font>
<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1086000&a=9815423" TARGET=_blank><font color=green>BD Dyno Days 10/28/00</A></font>

<font color=purple>

NRA Life Member! (Need to protect our rights and FREEDOM!!)<font size=-2>



[This message has been edited by BIG BOB (edited 02-18-2001). ]