Here I am

Archived Auto Trans Shops

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Archived Got to buy a new inj. pump

Archived Clutch help

Status
Not open for further replies.

Grey Wolf

TDR MEMBER
Does anyone have any recommendations for an automatic trans repair facility(s) in the LA (Santa Clarita, SFV) area. A friend needs someone familiar with our Dodge / Cummins combination, his is a 24V 98. 5.



At this point he only has 3rd, 4th, and reverse.



Thanks
 
hi, i have a shop in Riverdale, near Fresno. my cell is 559-355-4433. it sounds like he has one of two problems. The first thing could be the pcm. Sometimes it won't ground the Gov. Press. Solenoid. The other problem could be that the the Gov. Press. Solenoid is stuck open. First thing to try is put anti oxident grease on the connections of the PCM. Also some people have been having problems with water getting in the PCMs. Now whatever the case, the PCM is not totally destroyed cause you stillk have lockup and O/D.
 
Status
Not open for further replies.
Back
Top