Here I am

Autometer gauge set, Boost, EGT, Fuel Pressure, Brand new

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Used Stock or Aftermarket Clutch Disc in Eastern MI area 48444

For Sale Parts For 1994 to2002l

Status
Not open for further replies.
I have a brand new set of 3 gauges. I bought them to install in my truck because my Optix Fuel pressure gauge has been buzzing. Come to find out after ordering the gauges it's the isolator causing it. I can install these and use them, but really hate to if all I really need is an isolator. I bought them from a supplier of mine and don't want to return because it was a favor so I thought I would pass on the savings.





If you have any questions, post them up.





I'd like to get $400 for the set. I'll ship for free





They are these.





Autometer, 8560 http://www.summitracing.com/parts/atm-8560/overview/





Autometer, 8544 http://www.summitracing.com/parts/atm-8544/overview/





Autometer, 8505 http://www.summitracing.com/parts/atm-8505/overview/
 
I'm surprised there's no interest. I thought I got a good deal on them and was passing it along. I'll keep them up here and if there's no luck I'll install them I guess.
 
You can buy all 3 of these through summit for 493. 77 and get 100. 00 rebate which makes the total cost 393. 77, Where's your deal?
 
Last edited:
Damn, that's cheap. Didn't know there was a rebate now. I've got a little over $400 in mine. I guess ill just install them
 
Damn, that's cheap. Didn't know there was a rebate now. I've got a little over $400 in mine. I guess ill just install them
Yeah, when i clicked on the links you provided, the rebate popped up with the gauges, Thought i'd let you know, man if i had that much tied up in them, i'd install them, at least you won't lose money on them that way, Good luck, & God bless, Monte
 
Yeah, after ordering them I found out its just the isolator unit bad on my optix FP gauge. With a almost 10 year old truck I'd rather repair the cheap unit then install the gauges.
 
Status
Not open for further replies.
Back
Top