AutoMeter Ultralite Part #'s

[Patriot Diesel]

I am about ready to order my gauges. I have decided on the AutoMeter Ultralite series of gauges. I would like to order the gauges listed below. Does anyone have the correct part numbers ?



EGT

transmission temp.

Boost 0-60

Diff. temp.

Fuel Pressure







Thanks !!!

 

[KatDiesel]

Heres some numbers....

• EGT Gauge (0° to 1600° ) - #4365
• Thermocouple(what I use) - #5244
• transmission Temp (100° to 250° ) - #4357
• Boost (0 to 60 PSI) - #4305

Thats the ones I know of. I had the #4304 (0 to 35 PSI boost) but now run a 0 to 50 PSI Ultra-Lite gauge.



The fuel pressure gauge will depend on which one you want to use, they make #4313 which is a 0 to 15 PSI gauge with Isolater.



Differential temp gauge will depend on which one you want again, there are a couple of choices.



Go look around on AutoMeter's Website and look through the UltraLite Series to get an idea. Or send an email to Autometer directly.



Hope this helps some.

 

[Patriot Diesel]

Thanks Eric !



I ordered all 5 gauges from DIS a little earlier this evening. I did go with the FP gauge with the isolater.

 

[K_Arts]

Here's something that you should keep in mind. Autometer has a new EGT gauge out.



Their old on has a little black box that you have to plug the gauge and thermocoupler into. Well I have gone through this particular gauge 3 times. Finally Autometer sent me their new gauge that is wired directly to the thermocoupler... no more little black box.



Apparently These little boxes go bad very easily and were very poorly made (per Autometer)... they have had a lot of problems with them.



I will contact the service guy again and see if I can get this new gauges part number. NO problems yet...



Kev