Attention: TDR Forum Junkies B.G. Smith
TDR MEMBER
I used 1/4" threaded pipe couplings to braze to the fuel inlet and vent lines then screwed brass hose barbs into the couplings, I used #1 permatex for pipe dope (teflon tape will leak over time) I used 3/8" flexible fuel line, my filter is first in line then the pump and the switching valve is last. I have a manual valve at the tank for shutoff to change filter or whatever. My pickup line comes out the top of the tank. bg OOPS. I thought I put this on Tagalongs thread. bg
Last edited:
