Big turbo for twins?

[steveinaz]

1. ) What options are feasable for a second turbo in a set of twins?

My primary will be a H1C. I was hoping to use a H1E for my second. It has a assembly # 3528793. Serial #H010414315. 26 cm housing.

2. ) Has anyone used this setup?

3. ) Is the plumbing something I can buy? or do I have to fab it?

 

[J.R. Adkins]

The H1e is to small and has a 60mm compressor wheel. I would use a big hx55 or a ht3b. As far as the piping goes I have built quite a few of them.



J. R.

 

[steveinaz]

Great! I just let one go 'cause I thought it was too big.

Can I make a hybrid from my H1C and H1E?

Can I machine a 14 or a 16cm exh housing to fit the H1E and use it for my top turbo in a twin setup?

 

[bgilbert]

Sorry but, is the H1E a hx40 from the C-series? If no is it compareable?

 

[J.R. Adkins]

Great! I just let one go 'cause I thought it was too big.

Can I make a hybrid from my H1C and H1E?

Can I machine a 14 or a 16cm exh housing to fit the H1E and use it for my top turbo in a twin setup?

The H1E has a larger exhaust wheel than a hx40 so its not gonna be very responsive. I think it was used on the "C" series among other applications.



J. R.

 

[steveinaz]

Wanna buy a brand new ,never installed, H1E ? And yes it was originally slated for a mid 90's 8. 3

I did come across an HX50 from an M11. Is that big enough for a second in a twin setup?

 

[bgilbert]

The 50 some guys are using as a single. I'd go for the 55 or 60 from the ISX signature series. I'm looking for a 40-16w.