Here I am

Boost adjustment with Plate Kit

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Stalling with a/c on

Redline on 12 valve

Status
Not open for further replies.
Would there ever be a reason to adjust the allen screw in the boost elbow that came with TST kit?



Added the #11 with plate about in center. Get 30 - 35 lbs boost but plenty of egts and some smoke even with full boost from 2000 rpms on up.



I installed Medium spring with AFC spring kit. Have had to back it off almost to the middle. Locamotive type smoke when it was full rich (all the way forward or towards the engine).



This is on a 96 5sp with no cat.



Thanks for any advice.



jjw

ND
 
If you are getting up to 35lbs of boost you won't need to go with any more boost as you are not getting the fuel with you're setup to make use of it. :D
 
Status
Not open for further replies.
Back
Top