Boost Gauge ?????

[lawdog]

I am now looking into adding guages and possiblyputting my Edge EZ back on. . Took it off due to no guages... . Question I have is hoiw high of a guage do I need. Is 35 psi enough????? It would run either stock, Edge EZ or EZ with booste elbow. . Any suggestions appreciated. .

 

[KLockliear]

For a stock 555, or one with an EZ, 35psi is fine. ANY other mods, you'll be stepping up on the turbo and will want a bigger sweep gauge. We pretty much always put a 60psi gauge in the Dodges.

 

[lawdog]

Keith,

Thanks for the reply, The ONLY other mods would be a different exhaust, and it has an Amsoil air filter in the stock box. I don't need anything crazy, in fact I ran the EZ on 3 was the highest, but took it off when I got a BIG trailer... . So you feel a 35 should be sufficient or should I get a 60, and if so, which do you prefer, I was looking at Auto-meter Phantom, but only saw a 35 Boost... . unless I went with Blower Guage, that one goes to 60



Thanks. .

I also sent you a PM

 

[KLockliear]

Well, personally, we put the 60psi gauge in ANY Dodge, regardless of mods since they can and will exceed 35psi without too many mods.



We sell our own gauges, as I'm sure you know, of which one line is white, just like the Phantoms - and has a 60psi unit.