Boost pressures and EZ?????????

[CumminsPuller]

Had to remove the EZ and send back for warranty. Great service from Edge. Anyway, just made a trip to billings and my boost while in OD I could not get it to go past 20 or 21? Is that normal? In 3rd I could hit 25 sometimes... ... ... ... With the EZ hooked up does it actually increase boost pressures?



Jason

 

[Hohn]

Without the EZ, you are limited to the stock programmed limit of boost-- 21psi on the HO trucks. If you left the elbow on, you might momentarily be able to exceed that, but you will set a code, and the ECM will defuel until boost gets under 21.



HOHN

 

[Bob Wagner]

more fuel and timing = more boost

 

[CumminsPuller]

Hohn & Bob............

So since I have been running a week without my ez and just the DD1's, the elbow still installed does anything need to be reset before re-installing the EZ... ... ... . Do codes need to be cleared or not?



Jason

 

[Bob Wagner]

you will be fine

 

[CumminsPuller]

thank you.