Bypass oil return?

[Silverbullet]

Is there a good place in the block a body could use for the return of a bypass oil filter setup?



I've seen them taped on the valve cover, potential option, and returned to a new oil cap. But would like to find a plug somewhare on the block. There is a small port on the drivers side just above the ECM bracket. Could that work?

 

[TCDiesel]

Remove the Cover Plate that's in the Picture to the left and Make sure that it is open to the Oil cavity. That way you will know that it's not a coolant plug.

 

[Silverbullet]

Will do thanks.

 

[amsoilman]

There are places in the block that would alow you to return the oil back from the by-pass, but the oil fill cap affords the opportunity to draw oil samples for analysis with a very minimum of introducing contaminants to the sample.



Wayne