Cab Plates...anybody bought 'em?

[Archive]

I'm looking for a "Cummins" or "Cummins Power", etc... cab plate for my truck... does anybody own any? What are they like (size/color/etc... ) I've notice they aren't on Cummins site anymore but Geno's still has them.

------------------
2001 SLT dominantly valved ETH quadcab 4x4 dually
icq61308432

 

[Archive]

I've bought a couple of the ones with the 'Cdiesel power'. Cummins NW sells 'em here for $1. 65. They're black plastic with chrome lettering and approx 2-1/4 x 6".

-Mike

 

[Archive]

I ordered four of them from Geno's, two of them are sqaure approx. 2" tall, 4" wide, the other two are written in signature, both say Cummins Power. Look great on the side of my toolbox, one is right above the latch under the hood.

2001 ETC 24 Valve Cummins,Black,Auto,Every
option available,Agate Leather,3:55 gears,
Husky Floor Liners,No Muffler,No Resonator
33x12. 50 BFG Mudders on 16. 5x9. 75 Weld
Super Single II's,Chrome Rocker Panels,
Dee Zee Diamond Plate Toolbox,Bed Rails,
Tailgate Protector,Cobra 29 LTD Classic
CB, Soon to Come: VA,275 Injectors

------------------


[This message has been edited by Blackdog (edited 07-03-2000). ]

 

[Archive]

I put the Geno's Garage script "Cummins Power" plates on my mud flaps. They look good there.

------------------
Joe George
Eureka, CA

'95 2500 CC auto 4X4,Combo EGT/boost guage,custom switch panel,PacBrake,TST #5,BD valve body,Automatic motorhome steps on both sides,Foldacover hard bed cover,Cummins chrome kit,Black steel grill guard,Front hitch receiver

 

[Archive]

I just added the small blue "C" (Cummins) plates. They are the same height as the RAM2500 factory emblem. They are some kind of metal not plastic. Got some good 3M tape and added them behing the RAM2500 a few inches. I have had the CPower on my tailgate for several years now. For plastic they stand up very well.

jjw
ND

 

[Archive]

I have the plastic "Diesel Power" with the large "C" on my tailgate. I've had it for 4 years. Still looks new. I had the "Cummins Power" script on my doors. The chrome faded after about a year. When I removed them, I had one heck of a time getting the adhesive off the door.

------------------
98. 5 3500 QC 4x4, Driftwood/Mist Grey, 5 spd, 3. 54, 19. 5 Alcoa's, 245/70-19. 5 Michelin's, Ranchhand front bumper, Ranchhand rear bumper, Ranchhand toolbox, "Scotty Air", TST PowerMax2, Autometer Gauges, Centerforce clutch, Upgraded fuel lines (JRE and Aeroquip), MagHytec Diff Cover, PacBrake

 

[Archive]

Originally posted by JJW-ND:
I just added the small blue "C" (Cummins) plates. They are the same height as the RAM2500 factory emblem. They are some kind of metal not plastic.

Where did you get them?

------------------
Bill Lins Wharton, TX 98 2500 QC SLT,12 (the CORRECT # of)valves,NV4500,3. 54 LSD,Manik grille guard,Psychotty Air,Amsoil everywhere, Reading aluminum utility body and bumper,Optima yellow tops- silencer ring, cat,& muffler all stolen.

 

[Archive]

Bill,

You should be able to get the small blue C emblems from Cummins. A couple of them came with my Cummins chrome kit.

------------------
Joe George
Eureka, CA

'95 2500 CC auto 4X4,Combo EGT/boost guage,custom switch panel,PacBrake,TST #5,BD valve body,Automatic motorhome steps on both sides,Foldacover hard bed cover,Cummins chrome kit,Black steel grill guard,Front hitch receiver

 

[Archive]

Thanks!

 

[Archive]

Bill:

Geno's Garage in TDR!

jjw