Engine/Transmission (1994 - 1998) CAD Vacuum motor

[DieselDoghouse]

Have seen several references to replacing the vacuum motor (or 'solenoid') on the front axles of the G2 trucks for ~$35. 00. Every quote from every dealer here in MA is $130. 00. Does anybody have input on this? Anyone have a P/N in case I'm getting a misquote? Many thanks guys! I have been very specific at the shopsÑNOT looking for the whole axle casting, JUST the vacuum bladder which C-clips into place in the casting and carries the shift yoke between 2 additional clips.

 

[Andy Redmond]

Try the motor cover.



http://www.chryslerpartsdirect.com/moparonline.htm



35. 20/$28?



Motor itself 136/108? like you said. .



See if your local dealer's cover will fix you up?



You might also give Dan @ Quad 4x4 a ring, I bet he know right off what is included with what part etc. .



Good luck

Andy