Engine/Transmission (1994 - 1998) Clutch Ideas $$

[EXSTROKER]

I have a 96 5spd took the plate out ,bad idea. what kinda clutch

do i need to hold the power. . lowest cost Im feeling poor

 

[C. Harlan]

Call Peter at Southbend Clutch. . He can recommend the proper clutch for the budget you have available. . Just let me tell you one thing: You will not find better customer service, and support. I have never had any problems with my SBC clutches, and would go no other way. . If you need any more help, feel free to PM me.



-Chris-

 

[BTighe]

do it right the first time. southbend is what you want. you should also grind that plate and put it back in. cant remember what it is, but theres a part in the pump that can break if you dont run a plate.

 

[Turbo Thom]

Yep, like they said, no other way to go. Call Peter.



. . Preston. .

 

[EXSTROKER]

Well I guess that settles that I will call them,and yes I put the plate

back in

 

[pwerwagn]

what kinda clutch

do i need to hold the power. . lowest cost Im feeling poor

I was in the same boat when I had to buy a clutch (poor... ).

so, i went with the LUK cerametallic and re-drilled the flywheel to the larger pattern.

It works great, havent regretted it since. Cost me about half of what a Con OFE costs...

--Jeff