clutch rod clip part number HELP

[RAndrae]

Ok I am at wits end... I have a 04 with the motorized /adjustable pedal assembly. I need the clip that holds the clutch master cylinder rod to the clutch pedal arm. I looks like a bushing with clip arms. I goes in the eye of the rod that pushes into the clutch master cylinder. This bushing clip thing retains/ clips the rod to the stud on the clutch pedal. Please help

 

[NIsaacs]

Will this work?

http://www.quad4x4.com/PDGImages/-5249192230333284095_1.jpg

Nick

 

[RAndrae]

well no it wont..... the rod eye end is bigger than the stud...it needs this bushing/clip retainer thing to bush it to the correct size and retain it

 

[NIsaacs]

Ok, is it #6 in the diagram?

http://www.factorychryslerparts.com/images/parts/Chrysler/fullsize/i2159332.jpg

If so it should be this....

http://www.factorychryslerparts.com/products/BUSHING-Mounting-Hydraulic-Clutch-Actuator-BUSHING--Self-Retaining-DBBXAP--XAP--Clutch-Master-Cylinder-Push-Rod-to-Pedal--Push-Rod-Eye-Pin--Without-XA/4270327/04643448.html

Nick

 

[RAndrae]

I have the motorized /// movable pedal assembly. Totally different. The non movable is wide plastic etc....

 

[NIsaacs]

Ok, this one? Does not appear to have a parts break down so maybe it is not serviceable?

http://www.factorychryslerparts.com/images/parts/Chrysler/fullsize/00i84542.jpg

Nick

 

[RAndrae]

That's as far as I got.. guess we are f@#$ed if you loose or break that clip/ bushing while changing the clutch master cylinder.

 

[mwilson]

Is there enough left of it to post a picture??? Some of us may have seen it (or a similar style) used for other things....

 

[GCroyle]

I know which one it is, can find at work but take a look at this Dorman 74014 http://www.dormanproducts.com/p-51769-74014.aspx?origin=keyword or this one, has a different style w/o the extended cage
http://www.dormanproducts.com/p-32111-14041.aspx?origin=keyword

Gary

 

[RAndrae]

GCroyle I think you hit it.. the first one looks like it. I tried two different auto parts stores and two dealers with no luck. Thankyou!! hope it is the one.

 

[GCroyle]

Very confident it will be correct. I've only seen two versions of this retainer.

Also, to minimize chance for damaging when removing the p-rod, get a thin screwdriver blade BEHIND the clip flange and pry the clip and p-rod off the arm together.