Codes With Tst Powermax Cr

[jasons060]

JUST WONDERING IF THESE ARE THE CODES EVERYONE ELSE HAS THROWN WITH THE TST? P0606 P0336. IF SO DID YOU SEND THE BOX BACK TO REPROGRAM? ANDWHAT DO YOU DO ABOUT THE CODES?

 

[SRadke]

I have a code but it does not trip the check engine light. The only way I knew it was there was to cycle the key and look for it. Mark thinks he's got a fix if you want to send the box in for a reflash but I can live with it.



-Scott

 

[jasons060]

I'VE HAD MY BOX ON FOR A WEEK AND THOUGHT I WAS OUT OF THE WOODS, THEN TODAY THE CHECK ENGINE LIGHT CAME ON. THANKS FOR THE INPUT.

 

[Prairie Dog]

Mine also launched a code after about a week but it hasn't done anything since. I've got to say I really like this box, I haven't had a single problem other than the one code. I've been running on 4/4 and 5/5 and can only get it to touch 1200 degrees before it starts coming back down. It's got minimal smoke and it will spank just about any SUV short of a Porche Cayenne.

 

[jasons060]

Will a pusher pump smooth the box out on higher settings?

 

[SRadke]

Originally posted by jasons060

Will a pusher pump smooth the box out on higher settings?

Smooth it out? It will prevent it from running out of fuel which can cause what feels like a hesitation or cutting out but you can't run the high settings with the stock turbo due to egt issues anyway.



-Scott

 

[Agades]

heard a rumor that he had a new program that took care of the code problem



can anyone shed some light on this as of yet?

 

[SRadke]

He says he's got it fixed but I havn't had time to send mine back yet. Well, actually I don't want to be without the power for that long.



-Scott

 

[lmills]

I just installed mine last night. It set the 606 code within 10 minutes of running it on the road. Everybody is right. This box pulls like crazy. I spoke with Mark today about an issue I had with running it on the interstate. He feels that what I described to him was that I ran out of fuel. I ran it on 5x5 once and when it hit about 90 mph, it fell flat on it's face. I am going to check fuel pressure per his recommendation and go from there. So far I am very pleased.

 

[Agades]

Originally posted by lmills

I just installed mine last night. It set the 606 code within 10 minutes of running it on the road. Everybody is right. This box pulls like crazy. I spoke with Mark today about an issue I had with running it on the interstate. He feels that what I described to him was that I ran out of fuel. I ran it on 5x5 once and when it hit about 90 mph, it fell flat on it's face. I am going to check fuel pressure per his recommendation and go from there. So far I am very pleased.

so

im assuming the code issue is not fixed yet

or

do you have the old program?

 

[lmills]

I have a new box, I am not sure if it has the newest program in it or not. It is amazing how much power it has. At times when I am in 6th gear I can feel the clutch slipping on level 4

 

[jasons060]

I talked to Mark yesterday and he said the new program should take care of the codes. So I'm sending it back to get it reflashed.