Attention: TDR Forum Junkies Found my first problem yesterday in 14k miles on my 03. R/side of the block & axle was streaked with coolant residue. I thought "OK, this must be the blind plugs in the head that need tightening"
Wrong, found the block heater was hand tight, actually loosened it while trying to unscrew the locking ring that holds the 110V cord plug. It took about 1. 5 turns to secure it in the block. I guess someone forgot to torque it at the plant:-{}
Other than that, the truck is great. Very slight seepage at the rear pinion seal that I'm keeping an eye on.
Wrong, found the block heater was hand tight, actually loosened it while trying to unscrew the locking ring that holds the 110V cord plug. It took about 1. 5 turns to secure it in the block. I guess someone forgot to torque it at the plant:-{}
Other than that, the truck is great. Very slight seepage at the rear pinion seal that I'm keeping an eye on.
