Here I am

CPFF's Bypass oil filtration and twin turbos ???

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

New TST PowermxCR with Rail pressure (and Guage)

rebuilt common rail injectors?

Status
Not open for further replies.

JStieger

TDR MEMBER
I've been toying around with the idea of implementing bypass filtration on my truck, but the twin turbos are getting in the way, I don't want to run lines to a filter by the radiator, or run a length of lines to the passenger frame rail.



Would this system work with twin turbos? (Reference LightmanE300 gallery who sourced kit from TDR member CPFF/John Strenkowski):



#ad




#ad




Does the item in the 2nd picture replace the normal oil filter location?



Does one have to run Amsoil filters or will Fleetguard work too?
 
Last edited by a moderator:
JStieger said:
I've been toying around with the idea of implementing bypass filtration on my truck, but the twin turbos are getting in the way, I don't want to run lines to a filter by the radiator, or run a length of lines to the passenger frame rail.



Would this system work with twin turbos? (Reference LightmanE300 gallery who sourced kit from TDR member CPFF/John Strenkowski):



#ad




#ad




Does the item in the 2nd picture replace the normal oil filter location?



Does one have to run Amsoil filters or will Fleetguard work too?

THe second picture is the adapter used to adapt the BMK-15 Duel remote by-pass, which replaces the OEM oil filter location, and moves it to the BMK-15 mount which you have posted as the first picture. If you mount this unit as shown, I do not think you will have the room for you twins, as the mount and the two filters will be in the way.

I have seen guys use this system, but they mount the BMK-15 mount on the frame under the truck.



Wayne

amsoilman
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top