CR swap-DODGE Motorhome

[Rip]

Greetings fellow diesel nuts,



I joined this fine group many month ago to lurk and learn.



My project invoves an early '04 complete drivetrain in my '77 TRAVCO motorhome. I bought a perfectly good truck and completely stripped most everything. Wiring, dash, HVAC, steering column. Anything I might need.



The swap is going well, and if I can I'll post some pics. My first hurdle is that I need a front sump pickup. I'm turning the pan around due to interference with the drag link. If you know a part # please let me know.



Thanks!!



Mike Van Winkle



RIP

 

[Grey Wolf]

Mike welcome I would give Cummins a call for the oil pick up sorry I don't have a number to contribute...

 

[DVolk]

CR swap DODGE Motorhome

Check in the old threads there was a Travco motor home done a few years ago on tdr

 

[Shadrach]

What is the p/n on the pan you are using? If you can't find it what is the engine serial number ( ESN )? Shadrach

 

[Rip]

Thanks for the replys guys. I found the part # and it was priced at $80. Figurd I had nothing to lose, so I heated the brazed joint and took apart my rear sump pickup. Cut it to the very short length I needed and rebrazed the parts together. Came out perfect. I'm really amazed that I was able to simply flip the rear sump pan around and only a small modification to the lip to fit and I'm in business.



I'm now working on getting the giant radiator to fit... ..... some fitting required!!



RIP