Archived dana 60 wheel bearing help!!!!!!!

[Studie]

hey guys, i noticed some extra movement on the front wheel of my truck. the truck is a 93 w-250 with the 4500 lbs front dana 60. i think that the nuts may have backed off a little bit. i did the bearings about a year ago and believe that they are in good shape. my question is. . is there a little keeper pin that holds the nuts in place? so they dont back off? i was also wondering if anyone has any pictures or drawings of how everything is supposed to go? i looked in my FSM and there isnt a expanded view of the hub/bearing assembly. also i cant find anything on the internet.

 

[Hoefler]

If I remember correctly, the inside nut has a pin that sticks out on one face, the lock washer is full of holes to line up with the pin and is keyed in the hole to lock it with the spindle. You could have the pin missing or broke, the key in the washer could be worn down or broken. I have also seen the washer itself broken. Also check the key way in the spindle, it also could be broken out.

 

[RCorbeil]

Hoefler is correct



RCorbeil