Here I am

Deere Diese Tractor Hyraulics

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Need a Really Good Soldering Iron

Motion sensing light switch problems

I have this deere diesel and taking the loader off and on had been a royal pain



Well got out there today and cleaned the tips with Diesel and sprayed the connections with



WD-40 the wonder chemical and it freed up the coupling, snapped all 4 in, in about 10 seconds





Better then new



what a great solven



Chris
 
When you go to hool up, if you shut the tractor off and move the control lever for the loader it releases trapped hydraulic pressure and makes hooking implement hoses up much easier.
 
Yes Your correct, should really do that anyway when shutting down, or at least i always do and lower the 3pt hitch assempbly, relieves the pressure in the pump
 
hydraulics

I seem to remember the different quick coupler ends. One Ford and one ??? One was sq tip (Ford) maybe?? and round tip, the round tip was easier to change as I remember it. The sq tip had to have noooo pressure on it. :(
 
Back
Top