Attention: TDR Forum Junkies The DeeZee EZ-Down is not available for our Gen 2 trucks. Has anyone installed one from a Gen 3 truck on ours? I believe that a hole drilled in the tailgate will be necessary. That hole would be for the mounting stud. I'm guessing that the top attachment would interchange between the two models and that there is room in the jam area for the cylinder.
Exact placement of the drilled hole would be necessary to get the leverage right for the nitrogen cylinder.
Let me know about your attempts. Thanks, Lee
P. S. I'd also be interested in knowing if this thing works well on any truck.
Exact placement of the drilled hole would be necessary to get the leverage right for the nitrogen cylinder.
Let me know about your attempts. Thanks, Lee
P. S. I'd also be interested in knowing if this thing works well on any truck.
