DFW area dyno's?

[TX Gooseneck]

I'm wanting to get my truck dynoed as is, before I install my new turbo and want to find a good dyno in the Dallas area.



Also, should I look for a dynojet or a mustang dyno?



Thanks

 

[crawler]

Use a Dynojet. It's much more repeatable.



Later,

Wes

(903) 355-4475

 

[TX Gooseneck]

Wes,



Is there one around Greenville that you know of?

 

[jetenginedoctor]

Use a Dynojet. It's much more repeatable.



Later,

Wes

(903) 355-4475

Not a flame. . . . but I'm curious what makes you say that?

 

[EGaskamp]

I'm getting Mach4's and a Southbend Con FE in my truck. I want to dyno bad when I get them in. Can't wait to see how it runs!



Eric

 

[01smokinram]

I'm gonna dyno my truck before i put a transmission in it. I'm gonna use a place in Balch Springs right off of Military and 635 i believe. The last dyno was held there. The place is called Fastech i think. Wanna get some numbers before i do the transmission install. I'm gonna do it the first weekend of April then gonna get a transmission about the middle of April. So yall come on out and see what the girls will do. I'll be blowing a lot of smoke so bring your masks or cameras. It doesn't matter which yall bring. See ya around





Ray Oo.

 

[Forrest Nearing]

I'd like to put mine on the rollers... I can probably get a couple more local boys to bring their trucks too.



Forrest

 

[Jim Fulmer]

Not a flame. . . . but I'm curious what makes you say that?



Brian sometime this year you and I are going to get together... ..... after the break in period



Jim

 

[TX Gooseneck]

Forrest,

That's what I was thinking as well. I'm up for anywhere. There should be quite a few that are up for it.



My turbo arrived... . and I'm stuck in KC until Saturday

 

[TX Gooseneck]

Jim, what brand is your column pod?

 

[crawler]

Brian,



I didn't mean to offend you.



I respect your dynos and have even looked into purchasing one for my shop.



I didn't mean to exlude your dyno. My comment was only intended to illustrate my preference between dynojet and mustang dynos (which are more common).



Sorry to offend.



Guys,



We have been planning to have a local dyno day this spring, I've just been waiting for everyone to start piping up. Give me a call and we'll (BigDawgDiesel.com and SMdiesel.com) put together a dyno day for April. We'll set it up for the local guys. It won't be broadcast, so it gives the local guys a better chance of getting time on the dyno.



Don't worry Jim you're always invited. 8??+ HP is always cool to watch.

 

[crawler]

Also if any of you guys want to dyno at Fastech, just get a hold of me and I'll set it up. I work with them on all the diesel dyno runs.



Give me a shout and I'll get it set up.



Later,

Wes

(903) 355-4475

 

[Jim Fulmer]

Jim, what brand is your column pod?

Not a clue, got it from TST 3 years ago!



Jim

 

[TX Gooseneck]

Jim, LOL!



Wes,



Any idea on what they would charge for just one guy? I really want to roll this thing before my new turbo goes on (which is driving me nuts as I have it waiting for install!argh!!)

 

[01smokinram]

Lets do it this coming up weekend. I wanna do some tuning while there. Gotta get a regulator for my wastegate. So it's on this weekend for me. See yall there. Look for the maroon 2500 with stacks.



See ya

Ray

 

[Dakotahaulers]

Ray don't make me bring old blacky out of the garage before I do my head work. I would like to dyno to see what this new super "b" did for me if the cluth will hold up. Can't wait to see the twins. Is it two boys or girls or one of each. :-laf :-laf :-laf

 

[TX Gooseneck]

Alright fellas, do they have a website, phone number or map?



I also need a time. Fishing takes priority over the show saturday A. M.

 

[01smokinram]

Dyno

www.fastechperformance.com is the website to the dyno shop that we use here in DFW area. I didn't get a chance to get mine on the rollers but still would like to do it whenever it's conveinant for yall. Just let me know or give Wes a call to set it up. His number is 903-355-4475. if he doesn't answer leave a message or give me a call and leave a message and i'll try to get in touch with him. My number is 214-288-4600. The next weekend or the one after would work for me if everything goes as planned. Hopefully i'll hear from yall to see if this is a go or not.



See Ya

Ray

 

[TX Gooseneck]

Ray,



HPP located in Lewisville just reopened (another shop had it and shut down) For individuals it's $50 for 3 pulls, I'll check with Manny and see what he'll do for a group. Just let me know so I have an idea of numbers.

 

[01smokinram]

Make sure they have the optical pick up for the torque readings. I'll definitely be there if you can get this set up and i think i have 2 more that want to dyno. I'll check around to see if anybody else wants to also. I'll even give Wes a call to see if he knows anybody that'll dyno.



See ya

Ray