Attention: TDR Forum Junkies 
I just had a great experience with "Mid America Diesel" in North Platte, NE. I had talked to the Dodge dealer and he told me to see Mike at Mid America Diesel. Mike has been to Cummins training for most all their motors including the New Cummins that isn't out yet.
I had a miss arroun 900-1200 rpm
, I told him all the changes (bombing) I did and he had no problem. He said I need to get my timing reset to 14. 5 or so. He checked the over flow valve (tost) chaged it and the fuel pump was tost too. He also checked the valves and replaced the rubber hose to the pump.
While he was repairing every thing I told him that my pyro was easy to break 1300, and said my boost was 24 max. He asked if I had done any changes to the waste gate, (just an home made orifice) and he said it should be plugged, and he did it.
After he was done I test drove it. Now I have 34 lbs of boost, my pyro wont break 1100 (up hill over 90mph
).
All I have left is the timing (ran out of time, had to pickup the wife
).
I have nothing but good things to say about Mike and Mid-America Diesel. He got me in without an appointment, He was quick (2-2. 5 hours) and he had no problem changing the motor to benifit ME and my truck.
If you get to Mid Nebraska their address is...
Mid-America Diesel, Inc.
420 E. Walker Road
North Platte, Ne 69101
Ask for Mike
If you want the Phone # Email me
Mac
I had a miss arroun 900-1200 rpm
, I told him all the changes (bombing) I did and he had no problem. He said I need to get my timing reset to 14. 5 or so. He checked the over flow valve (tost) chaged it and the fuel pump was tost too. He also checked the valves and replaced the rubber hose to the pump. While he was repairing every thing I told him that my pyro was easy to break 1300, and said my boost was 24 max. He asked if I had done any changes to the waste gate, (just an home made orifice) and he said it should be plugged, and he did it.
After he was done I test drove it. Now I have 34 lbs of boost, my pyro wont break 1100 (up hill over 90mph
). All I have left is the timing (ran out of time, had to pickup the wife
). I have nothing but good things to say about Mike and Mid-America Diesel. He got me in without an appointment, He was quick (2-2. 5 hours) and he had no problem changing the motor to benifit ME and my truck.
If you get to Mid Nebraska their address is...
Mid-America Diesel, Inc.
420 E. Walker Road
North Platte, Ne 69101
Ask for Mike
If you want the Phone # Email me
Mac
