Door locks not working

[tmihalic]

My fob only locks and unlocks drivers door. This happened a few weeks ago on vacation. Figured I would have it checked out when we got home. As if by magic two days later it started working. Three weeks later its notworking again. Any way to fix this problem?

 

[lpennock]

How old are your fob batteries and your truck batteries?

 

[tmihalic]

How old are your fob batteries and your truck batteries?

All are less than a year old. When it’s working it works fine. Just never know when it will quit working again.

 

[lpennock]

Sounds like your Fob may be going bad. Trying opening it up and pull out the circuit board and look if the discs have come off the rubber buttons. On my 2010 Town and Country I go through fobs about every 2 years. Usually they will fail by randomly triggering remote start.

PS: fill in your signature with information on your truck. Makes it much easier for people to help you.

 

[lpennock]

This might help you.

 

[tmihalic]

Sounds like your Fob may be going bad. Trying opening it up and pull out the circuit board and look if the discs have come off the rubber buttons. On my 2010 Town and Country I go through fobs about every 2 years. Usually they will fail by randomly triggering remote start.

PS: fill in your signature with information on your truck. Makes it much easier for people to help you.

Already checked that

 

[AH64ID]

When it’s not working check the settings and see if it’s still programmed to lock/unlock all doors on the first press.