Engine/Transmission (1994 - 1998) Dr. P. Phase two

[hsmith]

I know this is a complete swap of the pump and injectors. Awesome upgrade. This is a customer of mine and is having trouble with turbo bark and excessive egt's. I will be going in to de-tune a tad.

Wondering if anyone knows which plate and what the timing may be with this setup.

Will be careful to make detail measurements before anything is changed. Also may be removing the timing case to take care of an oil leak. Will check the timing beforehand as this customer is really satisfied with the performance. Really do not want to make any mistakes.

Input welcome!!!



hsmith

 

[KLockliear]

Chances are it's a stock plate, all the way forward.

 

[hsmith]

Originally posted by KLockliear

Chances are it's a stock plate, all the way forward.

Thanks. Any guess where they may have set the timing?

 

[Joe G.]

You might find this thread interesting:

http://dieselram.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=3;t=000947#000019



And this one:

http://dieselram.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=3;t=001058#000000

 

[SEmerson]

Wow look at this HP claim in the sig



You might find this thread interesting:

http://dieselram.com/cgi-bin/ultima...t=000947#000019







Dr Performance hy-9 turbo/ 160+hp?



Man I should have got a hy instead... ... .....

 

[hsmith]

Originally posted by Joe G.

You might find this thread interesting:

http://dieselram.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=3;t=000947#000019



And this one:

http://dieselram.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=3;t=001058#000000

Thanks, I guess. Have had no experience with another Dr. P. truck. This mod was done 4 years ago, or there about. Customer has been satisfied with power. Drove it myself several times and thought it was much stronger than mine until my last upgrade.

Agree on the price as too high.

All I am trying to achieve now is lower egt's and less barking. I am going in and see which plate is there and where, etc.

Thanks for the threads. Read all and am surprised to see so many dissatisfied ctd owners with Dr. P.

But then, I am mainly a gas mech.

61 years old and still learning!