Here I am

DRC Signature Series Truck Release

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Exhaust-brake 05

White sport pics

Status
Not open for further replies.
Here is the first of many DRC Signature Series Off Road Trucks now available through DRC. What do you guys think?

Upgrades: Kore Suspension, Toyo tires, DRC Fiberglass, Juice/Attitude, DRC exhaust, DRC Intake, Custom Beadlock wheels and hours of prep.



[/IMG]#ad
 
Last edited by a moderator:
Looks flat out ****** off! I love it. Only one (IMHO) flaw, I would like to see the rear fender extend over the tires much like the front ones. I think that would be really clean. Just a thought.
 
Thanks Guys,

Tom,

If the wife can't get in, She can't Ride!!!

Diesel Nut,

The Fenders will be available for the rear in a couple of weeks.

Blake,

Customer opted for no bumper. Give me a call about the Walker Wheels. 17x8. 5 is the size with a 5 inch backspace. Fiberglass is required, or flared wheel coverings.



Thanks again guys,

Greg
 
Looks sweeeet!What about the inner wheel houses?It looks like the innerds are kinda like just out in the open! im just pickin on ya Greg. If I only had $10,000 laying around id build me the baddest 2nd gen around!
 
Looks pretty cool.

When you say available through DRC, do you mean you will be selling complete trucks or just the upgrades installed? If complete what about the 100k mile engine warrantee and 3/36 Dodge warrantee?

What are the specs on the wheels? hub centric? what is the backspacing? I am pretty sure you have always been pretty adamant about the wheels being the same offset as the factory and hub centric, like the Kore wheels are.
 
Bertram65 said:
Looks pretty cool.

When you say available through DRC, do you mean you will be selling complete trucks or just the upgrades installed? If complete what about the 100k mile engine warrantee and 3/36 Dodge warrantee?

What are the specs on the wheels? hub centric? what is the backspacing? I am pretty sure you have always been pretty adamant about the wheels being the same offset as the factory and hub centric, like the Kore wheels are.





The only mod that would void the warranty is the Juice/attitude. Just like any mildly bombed truck you can easily become your own warranty station. The wheels are 17x8. 5 inch with a 5 inch backspace. They are lug centric and are also tight around the hub. I know that we have been adamant about the wheels being the proper backspacing. The customer wanted zero tire rub and insisted on the 37/13. 5 17 Toyo MT. It is a huge tire and will rub with the correct backspacing. We have tested these wheels, which are on about half of the trucks that race Baja, and are confident the wheel will perform as intended. As for the trucks being available through DRC, this is a vehicle that has been thoroughly built to our standards and will rage flawlessly. We do all of the work in house, and have designed most of the parts ourselves. KORE Fox Race System is the root of the truck. For a customer that wants the very best, built by the innovators in the industry, there is only one choice. I have another one to build next month and interest is stirred for the 3rd truck already. I know that there are other guys who can try to put one together. Look at Banks, they royally screwed a truck up in my opinion. Kent and I have had at least a years discussion on how we would like to build a truck. This customer came to me and asked for the baddest truck on the road. He was also adamant about money not being an issue. I guess that is how it is when you are a professional race car driver, 40 years old and single!!!



Greg
 
Greg,

How exactly do they attach to the fender? Do they replace the entire fender? Is it a replacement BED that is all composite, lighter than stock, stronger than stock, won't rust, and won't need to be Line-X'ed?? (Hint,Hint)
 
Hey Greg what did the Banks folks do to that 2500 that is on the cover of the latest Diesel MAG? They installed the Kore system and the Banks system but the engineers reworked the front suspension so it moves straight up and down? What did they do use longer arms? Inquireing minds need to know.
 
Status
Not open for further replies.
Back
Top