bigceltic
TDR MEMBER
For anyone with a sagging drivers seat thinking of changing the foam cushion - do it. It is way easier than I thought it would be. Took me about half an hour and the difference is amazing. The original (2006) was torn along the outside edge (left side, facing front). No wonder there was no support. I did not have to fully remove the seat - just raised the seat to its full height, and removed the 4 nuts holding the seat to the frame and rocked it back. Allowed me to reach everything I needed to reach and fasten/unfasten. I had been hesitant to do this fix myself but figured I'd give it a go. Just and FYI to anyone thinking about doing it but hesitating. One of the easier fixes/mods I have done.
George
George