2nd Gen Non-Engine/Transmission Dss

[ChrisOlson]

Hello all



once again a wealth of knowledge on the TDR here. I have been having the death wobble steering thing going on 5000 miles ago took it to the dealer said track bar and steering shaft it was under warrenty still had the wobble I finally took it to some one other than the only dealer in town, well les schwab found bad ball joints replaced them all and new tires put on and still had the small wander. I had the DSS sitting on the shelf cause I was in the middle of moving and did not have time to install until today

it took 30 mins. and to quote someone else here it drives like my wifes brand new SUV. what a difference I will order the DTT soon

my only minor complaint was it took a month for DSS to get to me other than that the people at DSS were very nice and the product is worth every penny spent.



Tiny

 

[Ted Constantine]

who is selling the DSS other than Darin at this point? Is the one piers sells his? I am looking for a quicker method of or may be even some one that accepts credit cards.



TIA

Ted

 

[ToolManTimTaylor]

Ted, I believe it is. I remember Someone telling me the same thing before I got mine. I'll Check

 

[ToolManTimTaylor]

AHA Yes Piers did (Does?) But ......

Originally posted by Bob Wagner

for those having a hard time or long wait



TDR Member Rip Rook is stocking the DSS system in Portland, Oregon



http://www.sourceautomotive.biz





hope this helps

 

[Bob Wagner]

Originally posted by Ted Constantine

who is selling the DSS other than Darin at this point? Is the one piers sells his? I am looking for a quicker method of or may be even some one that accepts credit cards.



TIA

Ted

Rip also stocks the DSS in Portland OR



http://www.sourceautomotive.biz

 

[bmoeller]

Mike's steering brace- https://www.turbodieselregister.com/forums/showthread.php?s=&threadid=72670&highlight=darin



More reading- https://www.turbodieselregister.com/forums/showthread.php?s=&threadid=64315&perpage=15&pagenumber=1

 

[ToolManTimTaylor]

Cool Bob i posted YOUR POST a half hour BEFORE You did LOL!!!

 

[Darin Tessier]

Hi. I must apologize for the wait some of you have been experiencing. We use the Postal service which has never been known for speediness, but, we've found them to be the cheapest and most reliable. We had tried others, but, found considerably poorer service.



As for credit cards, there is a certain degree of fraud committed by some vendors, so to make sure nobody's number was inadvertently overcharged or fraudulently used, we decided not to use them. (makes it sound like we don't trust ourselves, doesn't it?!) We do all our business on a handshake. We take plain old checks, not certified or bank drafts, just personal checks.

And to show how honest people really are these days, we haven't had one bad one.



We may be a little slow, but we do the best we can. If someone is in a hurry, we are willing to send the brackets out before the check arrives.



Reputable dealers that can help speed things up are:



Rip Rook at Sourceautomotive

Piers Diesel Research

Mr. Bob's Distributing

Tom Allen at PSC in Texas



Thank you and if you have any complaints, don't be afraid to holler at me. Besides, I'm used to it-I'm married!



Darin Tessier



p. s. - We are the only ones who make this type of bracket and we hold the patent rights in Canada and U. S.

 

[Rman]

Darin have you finshed developing a new style track bar yet? I'm looking at adding the DSS soon, and while I'm at it I should probably do the track bar at the same time.

 

[Bob Wagner]

Thanks for posting Darin. Great Product

 

[rfcom]

Weyburn

Darin, we're taking a trip to Ontario in June and will be passing through Weyburn. Is it possible to pick up a stabilizer direct from you guys or do I go through a distributor? Do you install them too? Thanks.



Jim

 

[GiesJ]

Originally posted by Ted Constantine

who is selling the DSS other than Darin at this point? Is the one piers sells his? I am looking for a quicker method of or may be even some one that accepts credit cards.



TIA

Ted

What's up Ted ? I ordered mine last Thursday from Piers and it arrived today. Can't wait to get her on, too bad it's 2°F here right now.

J

 

[Darin Tessier]

rfcom-Hey, stop in and we'll install it free. And, you'll probably get fed too! It would be our pleasure.



The track bar bracket is at the laser cutters right now. We are hoping to see it early next week. We will post updates on our website.



Darin Tessier

www.solidsteel. ca

 

[JPLB22]

I have been eager to hear some good news about these brackets for the track bar ( assuming that means an adapter bracket to mount an '03 bar to a 2nd Gen ? ). My truck eats up 2nd Gen Dodge bars ever 15,000. I would love to put an '03 bar on there .



Jeff

 

[Turbo Tim 1]

Darin, any idea if the stabilizer can be put on with out any issues if the truck has a Fisher Minute Mount plow set-up. I know some guys have put it on with other plows but I haven't found information pertaining to the Fisher. Thanks

 

[jandtjil]

Originally posted by Darin Tessier

The track bar bracket is at the laser cutters right now. We are hoping to see it early next week. We will post updates on our website.



Darin Tessier

www.solidsteel. ca

SWEET!! Can't wait.



JJ

 

[wcjp]

I bought my DSS from Piers soon after they started stocking them. I've done other business from Rip Rook with no problems.

 

[Show Cattle Hotshot]

Hey Darrin ,





Im just over at Russell, Mb and was thinking that i just might drive over to Weyburn someday and have a visit and purchase a stabilizer being that the mail is so slow!



Cheers





Jared

 

[jandtjil]

Semi-patiently waiting for news on the track-bar brackets Darin, no pressure. Oo.



How much do I make the check for?



JJ

 

[Darin Tessier]

Well we are still waiting on the laser cutting place to get our parts, but they are running behind a bit. We are hoping to hear from them this coming week. Progress will be posted on our web site. We appreciate everyone's patience and hope it will be worth the wait.



Jared- Come on over anytime, we would be glad to meet you.



Thank you.

Darin Tessier

www.solidsteel. ca